HPE Aruba Networking Networking CX6300M 24p SFP+ LRM support and 2p 50G and 2p 25G MACSec Switch

SKU

R8S92A

Skip to the beginning of the images gallery

In Stock - Available On Backorder

Networking CX6300M 24p SFP+ LRM support and 2p 50G and 2p 25G MACSec Switch

HPE Aruba Networking Networking CX6300M 24p SFP+ LRM support and 2p 50G and 2p 25G MACSec Switch is available to buy in increments of 1

Category: Network Switches

More Information

More Information
Power over ethernet	No
Stackable	Yes
Ports type	N
SKU	R8S92A
EAN	0190017538693
Manufacturer	HPE
Availability	N
Product Family	Aruba Networking

Reasons To Buy

AI-native performance and power

The HPE Networking CX6300 Switch Series is a wire-speed solution that uses a fully distributed architecture with Gen7 ASICs that deliver low latency, increased packet buffering, and intelligent power consumption for AI, Wi-Fi 7, and Internet of Things (IoT) requirements.
The Virtual Switching Framework (VSF) allows you to quickly grow your network using high-performance front-plane stacking. Four built-in uplinks support speeds of up to 10, 25, 50, and 100 GbE for a total of 200 to 400 Gbps of stacking throughput per switch.
The Virtual Switching Extension (VSX) uses an inter-switch link (ISL) for high availability and state synchronization between two active-active switches with independent control planes; a switch can belong to either a Virtual Switching Framework (VSF) stack or a VSX cluster, but not both.
HPE Smart Rate multi-gigabit Ethernet delivers adaptive speed options for Wi-Fi, Internet of Things (IoT), and other clients, alongside Class 4 (30W), Class 6 (60W), and Class 8 (90W) PoE on each port (720W, 1440W, 2880W and 4320W maximum PoE budget options).
Additional features include a hibernation mode that enables CX6300 and CX6300L (Layer 2-only) switches to schedule downtime to conserve energy. The CX6300L stackable switches are Layer 2-only, balancing scalability, high-capacity, and cost-effective connectivity.

Automation and analytics

The HPE Networking CX6300 Switch Series delivers enhanced visibility with built-in analytics for real-time monitoring and a time series database (TSDB) that stores configuration and operational state data, making it available to quickly resolve network issues.
HPE Aruba Networking Central provides secure, AI-native full-stack network management and operations to optimize performance, accelerate troubleshooting, and unify wired networks with Wi-Fi, wide area networks, and more.
The Network Analytics Engine (NAE) provides real-time insights and actions, analyzing events that can impact network health and even mitigating problems directly through quarantining to support network, application, system and security operations.
HPE Networking Switch Multi-Edit Software introduces automation that allows for rapid network-wide changes and helps ensure policy conformance post network updates. Intelligent capabilities include search, edit, validation (including conformance checking), deployment, and audit features.
Import switch information into HPE Networking Switch Multi-Edit Software for simplified configuration management and for continual conformance validation.

Full stack management and security

The HPE Networking CX6300 Switch Series is supported on HPE Aruba Networking Central or HPE Mist delivering enhanced network visibility and an expanded AI toolset, addressing the scale and demands of the most mission-critical environments.
Dynamic segmentation that automatically applies and enforces user, device, and application-aware policies on HPE Networking wired and wireless infrastructures.
Improve visibility, performance, end-user experience and simplify IT operations with auto profiling, RBAC, L7 firewall. Application recognition and control are available via CX Advanced Feature Pack. These features are not supported on CX6300L switches.
Switch-to-switch tunnels enable scalable multi-tenancy support with Virtual Extensible Local-Area Networks (VXLAN) to VRF mapping, while allowing policy application through user roles; these features are not supported on CX6300L switches.
Reduce manual IT operations tasks around initial deployment or ongoing configuration changes to accommodate adds, moves, and changes with colorless ports using local user roles and local MAC authentication (LMA).

Deploy in data center topologies

HPE offers customers highly differentiated pre-engineered IT infrastructure solutions that span a wide variety of HPE Compute, HPE Storage, HPE Networking solutions supporting virtualization, vSAN, HCI, HPC, MCS, Microsoft, SAP HANA, VMware, Nutanix application and IaaS service offerings.
The 10/25GbE and 40/100GbE CX switches can be deployed as part of an HPE integrated and mixed compute, storage and networking configurations and deployments.
These ready-to-deploy, integrated IT data center solutions help simplify and speed IT service delivery while reducing the time, risk, and expertise needed to deploy complex solutions.

Description

The HPE Networking CX6300 Switch Series is a modern, flexible, and intelligent family of stackable switches ideal for access, aggregation, and data center top-of-rack (ToR). It features a cloud-native design and fully programmable operating system (OS). The CX6300 delivers advanced monitoring and troubleshooting with capabilities such as a real-time Network Analytics Engine, HPE Networking Switch Multi-Edit Software and flexible deployment options to implement and validate network configurations. A powerful Gen7 ASIC architecture delivers fast, non-blocking performance for AI, Wi-Fi 7, and Internet of Things (IoT) requirements. Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. The new CX6300M switches deliver 90W Class 8 PoE (up to 4320W of PoE budget), enhanced uplink capabilities up to 50G, MACsec/PTP/AVB support, and improved support for high-power enterprise and Wi-Fi 7 deployment.

What is new supporting point:
HPE Networking CX6300 Series delivers stackable Layer 3 switching with BGP, EVPN, VXLAN, VRF, OSPF routing, robust QoS, MACsec 256, PTP, AVB and LRM; these features are not supported on CX6300L
High-availability with choice between 2 to 10-member Virtual Switching Framework (VSF) stacking for scale, or 2-member Virtual Switching Extension (VSX) cluster for active-active redundancy
Management, insights, and actions via HPE Aruba Networking Central or HPE Mist. Dynamic segmentation enables enhanced security and simple access for users and IoT
Three stackable Layer 2-only CX6300L switches with HPE Smart Rate multi-gigabit and MACsec 256 encryption are available for high-performance access deployments
Powerful 7th Gen ASIC architecture provides the CX6300 series with 880 to 1760 Gbps system switching capacity, 660 to 1310 Mpps of system throughput and up to 200 to 400 Gbps stacking bandwidth
24 to 48 HPE Smart Rate multi-gigabit ports (1/2.5/5/10GbE) and 1 GbE fiber, supporting up to 90W 802.3bt PoE. New 24/48 port CX6300M models provide 90W power simultaneously for up to 48 ports.

Specifications

Management features
Switch type	Managed
Multicast support	Yes
Switch layer	L3
Ports & interfaces
SFP module slots quantity	4
SFP+ module slots quantity	24
Basic switching RJ-45 Ethernet ports quantity	0
Basic switching RJ-45 Ethernet ports type	No
Installed SFP modules quantity	0
Installed SFP+ modules quantity	0
Fiber optic connector	SFP, SFP+, SFP28
Console port	RJ-45/USB Type-C
I/O ports	24x 10/100/1000 BaseT PoE+ ports supporting up to 30W per port 4x 1G/10G/25G/50G [4] SFP ports Supports PoE standards IEEE 802.3af, 802.3at 1x USB-C console port 1x USB Type-A host port 1x OOBM port
Network
Networking standards	IEEE 802.1AX, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1ak
VLAN support	Yes
Spanning tree protocol	Yes
Port mirroring	Yes
Link aggregation	Yes
Flow control support	Yes
Ethernet LAN data rates	1000,10000 Mbit/s
10G support	Yes
IGMP snooping	Yes
Optical fiber
Transmission distance (max)	10 km
Fiber optic connector	SFP, SFP+, SFP28
Data transmission
Throughput	334 Mpps
Latency (1 Gbps)	4.24 µs
Latency (10 Gbps)	1.5 µs
Packet buffer memory	16 MB
MAC address table	32768 entries
Switching capacity	448 Gbit/s
Jumbo frames support	Yes
Security
SSH/SSL support	Yes
Security algorithms	SSH
IGMP snooping	Yes
Access Control List (ACL)	Yes
Authentication type	RADIUS, TACACS+
DHCP features	DHCP client, DHCP server
Multicast features
Multicast support	Yes
Protocols
Routing protocols	BGP, BGP4
Design
Form factor	1U
Stackable	Yes
Rack mounting	Yes
Number of fans	2 fan(s)

Performance
Physical stacking (units)	10
Processor frequency	1800 MHz
Memory type	DDR4-SDRAM
Internal memory	8000 MB
Flash memory	32000 MB
Built-in processor	Yes
Processor model	ARM Cortex-A72
Packet buffer memory	16 MB
Stackable	Yes
Power
AC input voltage	100 - 240 V
Power consumption note	Depending on installed PSU Idle: 60W – 110W 100% Traffic: 95W – 165W
Power supply note	2 field-replaceable, hot-swappable power supply slots 1 minimum power supply required (ordered separately) Supported PSUs JL085A and JL757A.
Power over Ethernet (PoE)
Total Power over Ethernet (PoE) budget	720 W
Power over Ethernet (PoE)	Yes
Other features
Latency	1 Gbps: 4.24 μs 10 Gbps: 1.50 μs 25 Gbps: 2.91 μs 50 Gbps: 3.49 μs
Performance management	Management, insights, and actions via HPE Aruba Networking Central or HPE Mist (Requires OS-CX10.18.1002)
Memory and processor	Quad Core Arm Cortex A72 @ 1.8 GHz, 8 GB DDR4, 32 GB eMMC 16 MB Shared Packet Buffer Memory
Fan	Switch has two fan tray slots and comes with two fan trays installed. Minimum two fan trays required. Fan trays are field replaceable and hot‐swappable. Each fan tray contains two fans.
Weight (imperial)	6.71 kg (14.8 lbs)
I/O ports	24x 10/100/1000 BaseT PoE+ ports supporting up to 30W per port 4x 1G/10G/25G/50G [4] SFP ports Supports PoE standards IEEE 802.3af, 802.3at 1x USB-C console port 1x USB Type-A host port 1x OOBM port
Dimensions (W x D x H) (imperial)	43.9 x 442 x 386.1 mm (1.73 x 17.4 x 15.2")
Ethernet LAN data rates	1000,10000 Mbit/s
Operational conditions
Storage temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	15 - 90%
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	15 - 95%
Virtual LAN features
VLAN support	Yes
Weight & dimensions
Width	44 mm
Depth	442 mm
Height	385 mm
Weight	6.71 kg
Weight (imperial)	6.71 kg (14.8 lbs)
Dimensions (W x D x H) (imperial)	43.9 x 442 x 386.1 mm (1.73 x 17.4 x 15.2")
Technical details
Physical stacking (units)	10
Form factor	1U
Stackable	Yes
Processor frequency	1800 MHz
Rack mounting	Yes
Built-in processor	Yes
Memory
Packet buffer memory	16 MB
Memory type	DDR4-SDRAM
Internal memory	8000 MB
Flash memory	32000 MB